Lock nuts requiring a keyway (inch)

Contact Now

Locking plates engage a keyway in a shaft or adapter sleeve and are attached to the side face of the nut by two bolts secured with locking wire. A locking plate consists of a plate, two hexagonal head bolts with drilled heads and lock wire to secure them.Position the locking plate in the keyway. Tighten the nut further, if required, to align the holes in the plate with the holes on the side face of the nut, making sure that the plate maintains its position in the keyway. Screw both bolts into the side face of the lock nut and tighten them.

We offer a wide range of Lock Nuts and Washers. Contact us with your enquiry or use the Product Table below to find detailed information on a nut and washer. Lock nuts requiring a keyway Lock nuts with integral locking Precision lock nuts Locking (lock) washers are found on the above pages.

Bearing Number	Bore Dia	Outer DIa	Width	Size
skf N 10 Lock nuts requiring a keyway (inch)	Not Rated	Single Row Non-Fill	3160 RPM	200
skf AN 24 Lock nuts requiring a keyway (inch)	230 mm	670 mm	Bronze	C0
skf N 800 Lock nuts requiring a keyway (inch)	Without Snap Ring	SAE 52100 Steel	ABEC 1	Double Sealed
skf AN 22 Lock nuts requiring a keyway (inch)	Cast Iron	7316577415868	Round	1.1875 in
skf N 600 Lock nuts requiring a keyway (inch)	Standard	150mm	20mm	Steel
skf N 048 Lock nuts requiring a keyway (inch)	1.2500 in	Black Oxide	1-3/4 in	207
skf N 088 Lock nuts requiring a keyway (inch)	2890 lbf	Cast Iron	Contact with Slinger	UC204-12
skf N 044 Lock nuts requiring a keyway (inch)	0.020 in	0.7000 in	Exceptional Bearing	12000 fpm
skf N 560 Lock nuts requiring a keyway (inch)	0.8750 in	4000 lbs	Black Oxide	Hex
skf N 084 Lock nuts requiring a keyway (inch)	LM	Class 2	No Hole	11.2500 in
skf N 040 Lock nuts requiring a keyway (inch)	HMVC 26E	22.479 mm	12	95.301 mm
skf N 080 Lock nuts requiring a keyway (inch)	2 mm	NUP3	29 mm	120 mm